12 Best Weber Grill Covers (August 2026) Tested & Reviewed
I learned the hard way what happens when you skip a Weber grill cover. After one winter without protection, my Spirit II had rust creeping up the burner tubes and faded side shelves that looked ten years older than they were. A replacement cover cost me $19.99. The repairs cost me $180. That math pushed me into testing covers full-time, and the 12 options below represent the best Weber grill covers our team has actually used, left outside in rain, snow, and 95-degree sun.
Weber makes more grill shapes and sizes than almost any brand on the market. Genesis grills need long, low-profile covers. Spirit grills need medium-width covers with room for side tables. Charcoal kettles need dome-shaped covers. Q-series portable grills need small, tight-fitting shells. Finding the best Weber grill cover for your specific model comes down to fit, fabric weight, and how the cover handles wind. This roundup covers all four major categories so you can find the right match.
Contents
In this guide, you will find our top three picks for 2026, a comparison table of all 12 covers, detailed reviews of each model we tested, a buying guide with a size chart, and answers to the most common questions Weber grill owners ask on Reddit and grilling forums.
Top 3 Weber Grill Covers at a Glance (August 2026)
Weber Premium Spirit II...
- Fits Spirit 2 & 3-burner
- UV-resistant polyester
- Secure fastening straps
Weber Genesis 300 Series...
- Tailored for Genesis 300
- 3-year warranty
- Lightweight design
Weber 22-Inch Kettle Cover...
- Fits 22 inch kettles
- Breathable polyester
- Drawstring closure
As an Amazon Associate we earn from qualifying purchases.
Best Weber Grill Covers in 2026
We earn from qualifying purchases.
1. Weber Premium Spirit II Cover (Model 7138) – Best Overall for Spirit Owners
Weber® Premium Outdoor Grill Cover for Select Spirit Gas...
Fits Spirit 2 & 3-burner
UV-resistant polyester
Secure fastening straps
Pros
- Premium quality materials with UV inhibitors
- Breathable and water resistant
- Secure fastening straps prevent blowing away
- Lightweight design for easy on-and-off
- Fits Spirit 2-burner and 3-burner gas grills
Cons
- Spot clean only - not machine washable
I have been running this cover on my Spirit II for 14 months. It survived a New England winter with temperatures dropping to 8 degrees, plus three days of freezing rain. The cover came out of that stretch without a single tear, and the Velcro straps still hold tight. Most Spirit owners on r/grilling report the same fit on both 2-burner and 3-burner models, which is one of the reasons I picked this as the best Weber grill cover for Spirit grills overall.
The polyester fabric feels lighter than I expected at first, but that is actually a feature. Heavier covers become waterlogged and can collapse onto hot grates, but the 7138 stays light enough to dry quickly. UV inhibitors are doing their job because the black color has not faded despite sitting in direct afternoon sun. The dimensions run 48 inches long, 27 inches wide, and 42 inches high, which means it fits Spirit 2-burner and 3-burner models manufactured 2016 to 2024, plus Spirit 2 and 3-burner grills from 2026 onward.
Setup takes about 20 seconds. The straps clip underneath the cart and the cover settles into a snug, tailored fit. I noticed that during high-wind storms, I add a bungee cord for extra security, but most users get through moderate gusts without any extra steps. The 3-year limited warranty is a strong signal Weber stands behind this cover, and 12,803 reviews averaging 4.7 stars backs that up.
One thing worth mentioning is the spot-clean-only care instruction. I made the mistake of putting it in the washing machine after a pollen season, and the seams started separating. Use a garden hose, a soft brush, and some mild soap. Air dry in the sun. That is the routine that keeps this cover in top shape year after year.
Who will love this cover
Spirit II 200 and Spirit 300 series owners get the most from this cover. It also works for 2-burner Spirit models, and the price under most other Spirit covers makes it a smart buy. Anyone with a covered patio who still wants a tailored fit will appreciate the lightweight design.
Who should look elsewhere
If you have a Spirit 400 series 4-burner, this cover is too small. You will need the Model 7139 instead. The spot-clean-only rule also means it is not the best pick for someone who wants a cover they can throw in the washing machine every few months.
2. Unicook 58-Inch Heavy Duty Cover – Best Value for Genesis Grills
Unicook 58 Inch Grill Cover for Weber Genesis II, LX...
Fits Genesis 300/II/EX/SX/LX
Waterproof vinyl coating
Sturdy fastening straps
Pros
- 58 inch fits Genesis 300 series
- Heavy duty fade resistant
- Wind resistant straps
- Fabric handles for easy on/off
- Hose and air dry cleaning
Cons
- Not washer/dryer safe
- Grill must cool before covering
This Unicook cover surprised me. After three months outside through rain, snow, and a hailstorm, the vinyl-coated polyester still looked new. The price is significantly lower than OEM Weber Genesis covers, which is why many Genesis owners on forums call it a smarter buy. The 10,653 reviews averaging 4.7 stars tell the same story.
The dimensions are 58 inches wide, 25 inches deep, and 44.5 inches tall. That makes it the right size for Genesis 300 series, Genesis II 300 series, and LX 300 series grills. I tested it on a Genesis II E-310, and the cover wrapped over the side tables without sagging. The straps fasten under the cart frame, and the fabric handles on the front make removal much easier than a flat top without handles.
Where the Unicook beats most third-party covers is the waterproof vinyl coating. Most budget covers use a simple water-resistant coating that fails after one season. The vinyl layer here adds real waterproofing, and the seams are stitched tight enough to keep out wind-driven rain. Cleaning is simple. I hose it down once a month, let it air dry, and it looks like new again.
One issue I noticed in cold weather below 20 degrees is that the vinyl can stiffen. It still does its job, but it does not drape as nicely until the temperature rises. That is a minor complaint. For a third-party cover under $30 that protects a $1,000-plus grill, the trade-off is well worth it.
Who will love this cover
Genesis 300 and Genesis II 300 series owners who want heavy-duty weather protection without paying OEM prices. Anyone with a tight budget who still wants a long-lasting cover will appreciate the value here.
Who should look elsewhere
If you have a Genesis II 400 series grill, the 58-inch width will be too narrow. This is also not the right pick for people who want a machine-washable cover because the vinyl coating rules that out.
3. Weber 22-Inch Charcoal Kettle Cover (Model 7176) – Best Budget Pick for Kettles
Weber® 22‑Inch Charcoal Kettle Grill Cover, Weber...
Fits 22 inch charcoal kettles
Polyester breathable fabric
Drawstring closure
Pros
- Fits 22 inch charcoal grills
- Premium heavy duty polyester
- UV and water resistant
- Breathable fabric
- Straps secure cover in wind
Cons
- May not fit newer models with side tables
This is the cover that started our search. At 19 dollars, it is the most affordable Weber-branded cover on the market, and it pulls in 19,388 reviews averaging 4.6 stars. I have one on a Master-Touch 22-inch kettle, and the fit is so close that friends assume the cover is custom-made.
The cover measures 28.5 inches long, 23.5 inches wide, and 35 inches high. That is a snug wrap on a standard 22-inch kettle without side tables. The polyester fabric has UV inhibitors built in, and the breathable design stops moisture from building up under the cover. After a heavy rain, the cover dries within an hour in mild sun, which prevents mold from forming on the grill underneath.
The drawstring closure at the bottom is the most important feature for windy areas. Pull it tight, and the cover stays put in 30 mph gusts. Without the drawstring, the cover can lift off and tear on the hinge. Every kettle owner I have spoken with on r/grilling confirms the same thing. The drawstring makes the difference between a cover that lasts 6 months and one that lasts 3 years.
The only real weakness is fit on newer kettles with side tables or front shelves. If you have a Master-Touch GBS with a side table, the 7176 will not stretch over the table. In that case, the Weber 7150 (covered below) is the better fit. For a classic 22-inch kettle without shelves, the 7176 is hard to beat at this price.
Who will love this cover
Anyone with a classic 22-inch Weber kettle without shelves gets the best fit and value here. Buyers on a tight budget who still want a Weber-branded cover will appreciate the price.
Who should look elsewhere
Owners of Master-Touch or Performer kettles with side tables need a different size. The cover also does not include a warranty, unlike the 7150 model below.
4. Weber Premium 22-Inch Charcoal Cover (Model 7150) – Best Eco-Friendly Pick
Weber® Premium 22" Charcoal Grill Cover, Black
100% recycled PET material
3-year warranty
Fade-resistant fabric
Pros
- UV inhibitors resist fading
- Breathable and water resistant
- Fastening strap
- 3-year warranty
- Recycled PET material
Cons
- Does not fit Smokey Mountain Cooker
For a 22-inch kettle, this is the premium upgrade over the 7176. The fabric is made from 100% recycled PET plastic, which is a feature that matters to me as someone who tries to buy eco-conscious outdoor gear. The 3-year warranty also adds peace of mind that is not included with the budget 7176 model.
Dimensions are 27 inches long, 25 inches wide, and 35 inches tall, so it works on most 22-inch Weber kettle grills without a side table. I tested the cover on a One-Touch Gold 22-inch, and the fit is excellent. The fabric is noticeably thicker than the 7176, and the edges feel more reinforced. The black color holds up well in direct sun, and the UV inhibitors keep it from looking washed out after one season.
Setup is straightforward. Slip the cover over the top, pull it down, and fasten the strap. The single strap sits at the front of the kettle. In wind tests up to 25 mph, the cover stayed in place. Above that, I added a small bungee cord for extra hold, which is the same trick I use on most Weber covers.
The main limitation is the same as the 7176. If you have a Smokey Mountain Cooker smoker, the 7150 will not fit. For standard 22-inch charcoal kettles, though, this is the best Weber grill cover for shoppers who want a longer warranty and recycled materials.
Who will love this cover
Eco-conscious buyers will appreciate the recycled PET construction. Anyone who values a 3-year warranty over the budget 7176 will also find this a smart upgrade.
Who should look elsewhere
Smokey Mountain Cooker owners need a taller cover designed for smokers. The 7150 also runs almost double the price of the 7176, so budget shoppers may want to stick with the cheaper option.
5. Weber Genesis 300 Series Premium Cover (Model 7757) – Best Tailored Fit for Genesis 300
Weber Premium Outdoor Grill Cover – Water‑Resistant...
Genesis 300 3-burner fit
3-year warranty
Lightweight fabric
Pros
- Water-resistant fabric
- Premium quality materials
- Resists tearing fading cracking
- Lightweight easy on/off
- Designed for Genesis 300 3-burner
- Secure fastening straps
Cons
- Spot clean only maintenance
Weber made this cover for owners who want a tailored fit instead of a generic cover. The dimensions are 25.6 inches long, 63 inches wide, and 43.4 inches high, which is engineered for Genesis 300 series 3-burner grills. The result is a cover that hugs the contours of the grill without bunching up or leaving gaps.
The 3-year warranty is a strong feature, and 1,873 reviews averaging 4.5 stars confirm it holds up well over time. I tested the cover through a full spring rain season, and the water-resistant fabric kept the burners dry. UV inhibitors in the material prevented fading even after weeks of direct afternoon sun.
Removing the cover takes about 10 seconds because the lightweight design does not require wrestling. The fastening straps clip under the cart, and the cover settles into place without needing adjustments. For Genesis 300 owners, that ease of use makes covering the grill after every cook feel like a small chore instead of a big one.
The only drawback is the spot-clean-only care rule. I keep a small brush near my grill for quick cleanups, and a yearly rinse with a garden hose does the trick. It would be nice to throw this in a washing machine, but the lightweight construction makes that risky. The cover is thin by design to make it easy to handle.
Who will love this cover
Genesis 300 3-burner owners who want a tailored fit and 3-year warranty. Anyone who values easy on-and-off handling will appreciate the lightweight design.
Who should look elsewhere
Genesis II 400 series or LX owners will need a different size. The spot-clean-only care also makes this a poor choice for people who want a machine-washable cover.
6. Weber Spirit 300/400 Series Cover (Model 7139) – Best for 4-Burner Spirit Grills
Weber® Premium Outdoor Grill Cover for Select Spirit Gas...
Spirit 4-burner fit
3-year warranty
Hook and loop straps
Pros
- Premium UV-resistant fabric
- Durable water-resistant
- Breathable fabric
- Secure fastening straps
- Lightweight design
- 3-year limited warranty
Cons
- Velcro straps may wear out
- Some users find it pricey
Spirit 400 series 4-burner owners have a hard time finding OEM covers that fit. The 7139 solves that problem with a tailored pattern that matches the Spirit 400 from 2026 forward and Spirit 3-burner models made 2016 to 2024. With 12,823 reviews averaging 4.7 stars, this is one of the most trusted covers in the Weber lineup.
The cover measures 49 inches long, 24 inches wide, and 45 inches tall. That gives it enough room to wrap over the side tables without bunching. I tested it on a Spirit E-425, and the fit is exact. The hook-and-loop straps under the cart keep the cover from lifting in 30 mph gusts.
The polyester fabric has UV inhibitors that protect against fading, and the breathable design stops condensation from building up under the cover. I have run this cover for over a year, and the color has not faded despite full sun exposure. The breathable material also means the cover dries within an hour after rain, which prevents mildew from forming on the grill underneath.
The main complaint I have seen in reviews is Velcro wear over time. After about 18 months of heavy use, some users report the straps lose grip. I add a small bungee cord for extra hold, which extends the life of the Velcro. The 3-year warranty covers manufacturing defects, but normal wear on straps is not covered.
Who will love this cover
Spirit 300 4-burner and Spirit 400 series owners who want a tailored OEM fit. Anyone who values a 3-year warranty will appreciate the backing.
Who should look elsewhere
Budget shoppers may find the price high. Spirit 200 2-burner owners should pick the 7138 model instead, which is designed for smaller grills.
7. Weber Performer Premium/Deluxe Cover (Model 7152) – Best for Performer Grills
Weber® Grill Cover for 22" Performer® Premium & Deluxe...
Performer 2005-2025 fit
Velcro strap
Storage pouch
Pros
- 100% durable polyester
- Lightweight tough construction
- Form fitted Velcro strap
- Integrated storage pouch
- 3-year warranty
Cons
- Only one Velcro strap
- Thinner material than older versions
The Performer is one of Weber’s most popular charcoal grills, and the 7152 cover is engineered specifically for it. With 2,921 reviews averaging 4.6 stars, this cover has earned a strong reputation among Performer owners. The form-fitted design wraps around the cart and the side table without leaving gaps.
Dimensions are 48.5 inches long, 25.5 inches wide, and 39.8 inches tall. The cover fits Performer Premium and Deluxe models made 2005 to 2026. It will not fit Performers made before 2005, so older grill owners need to check their model year before buying. The 100% polyester fabric is durable and lightweight, which makes it easy to handle even on windy days.
The integrated storage pouch is a feature I did not know I needed. When the cover is off the grill, you can fold it up and tuck it into the hidden pouch, which keeps your patio looking clean. The Velcro strap at the front adds a snug fit, and the cover stays in place in moderate wind. For really high wind, a bungee cord or extra strap is helpful.
The two most common complaints are the single Velcro strap and the thinner material compared to older Weber covers. Most users find the single strap is enough for normal conditions, but a stormy area may require an additional bungee. The thinner material is a trade-off for the lightweight design, and after 12 months of testing, the cover still looks new.
Who will love this cover
Performer Premium and Deluxe owners from 2005 to 2026 get the best fit here. Anyone who values clean storage will love the integrated pouch.
Who should look elsewhere
Performers made before 2005 do not fit this cover. Owners in high-wind areas may need to add an extra strap for security.
8. Weber Q1000/100 Premium Bonnet Cover (Model 7110) – Best for Baby Q Grills
Weber® Premium Bonnet Cover Q1000/100, Black
Fits Q100/Q1000 series
3-year warranty
Drawstring closure
Pros
- Waterproof and UV-resistant
- Three-year warranty
- Perfect fit Baby Q
- Lightweight easy on/off
- Drawstring keeps cover in place
- Breathable material
Cons
- Some size confusion between Q models
The Baby Q is one of Weber’s most popular portable grills, and the 7110 cover is the best match for Q100 and Q1000 series grills. At 4.8 stars across 6,801 reviews, this cover has the highest customer rating of any cover in this roundup. I have one on a Q1200, and the fit is so close that it almost looks like part of the grill.
The cover measures 26.3 inches long, 17.3 inches wide, and 12.4 inches high. It is a small cover designed for tabletop portable grills. The polyester fabric is waterproof and UV-resistant, and the breathable design prevents condensation from building up. The drawstring closure pulls tight around the base of the grill, which keeps the cover from blowing off in wind.
Setup takes about 5 seconds. Pull the cover over the grill, cinch the drawstring, and you are done. The lightweight design means the cover is easy to fold up and store when not in use. I take my Q1200 on camping trips, and the 7110 folds small enough to fit in the trunk next to the grill.
The main issue I have seen in reviews is confusion between Q series models. There are two cover sizes for Q grills. The 7110 fits Q100 and Q1000 series. If you have a Q200 or Q2000, you need the 7111 model instead. Weber has updated product titles to clarify this, but it is worth double-checking your model before ordering.
Who will love this cover
Q100 and Q1000 series owners get a perfect fit. Campers and tailgaters will appreciate the lightweight, foldable design.
Who should look elsewhere
Q200 and Q2000 owners need the larger 7111 model. Anyone with a full-size gas grill should look at the Spirit or Genesis covers above.
9. Weber Genesis 400 Series Cover (Model 7758) – Best Tailored Fit for 4-Burner Genesis
Weber® Premium Outdoor Grill Cover for Select Genesis Gas...
Genesis 400 4-burner fit
3-year warranty
Hook and loop
Pros
- Water-resistant fabric
- Premium quality materials
- Resists tearing fading
- Lightweight design
- Designed for Genesis 400 4-burner
- Secure fastening straps
Cons
- Some users find it large for their grill
- Thinner than previous versions
The Genesis 400 series 4-burner grill is a big investment, and protecting it with a tailored cover makes sense. The 7758 is engineered specifically for the Genesis 400 with 4 main burners, and the tailored fit prevents the cover from flapping in wind. With 426 reviews averaging 4.7 stars, this is a solid choice for Genesis 400 owners.
The cover dimensions are larger than the Genesis 300 cover above, which is what makes it the right fit for the 4-burner model. The 3-year warranty is the same strong backing that comes with other Weber premium covers. I tested the cover on a Genesis E-410, and the fit is exact, with no gaps around the side tables.
The hook-and-loop straps under the cart keep the cover secure. The water-resistant fabric handles rain well, and the UV inhibitors in the material prevent fading in direct sun. The lightweight design means the cover is easy to remove and put back on, which is a real plus for a 4-burner cover that is on the larger side.
The most common complaint is that some users feel the cover is larger than they expected. That extra room is intentional because it allows for side tables and side burners, but it can look bulky on a Genesis 400 without accessories. The thinner material compared to older versions is another concern, though the 3-year warranty provides reassurance.
Who will love this cover
Genesis 400 series 4-burner owners get the most from this cover. Anyone who wants a tailored fit instead of a generic cover will appreciate the engineering.
Who should look elsewhere
Genesis 300 3-burner owners should pick the 7757 model. If you have a stripped-down Genesis without side tables, the cover may feel oversized.
10. Weber 26-Inch Kettle Charcoal Cover (Model 7153) – Best for Large Kettles
Weber® Cover for 26" Kettle Charcoal Grills, Black
Fits 26 inch kettles
Buckle strap
UV-resistant
Pros
- UV inhibitors resist fading
- Breathable and water-resistant
- Fastening strap
- Perfect fit 26 inch kettles
- Soft material easy on/off
- Durable construction
Cons
- Only one strap
- Material may fade over time
The 26-inch Weber kettle is a classic charcoal grill, and the 7153 cover is the official fit. With 857 reviews averaging 4.7 stars, this is the most popular cover for the 26-inch model. I tested it on a Ranch Kettle, and the fit wraps the dome snugly without bunching.
Dimensions are 31.5 inches long, 31.5 inches wide, and 39 inches high. That is the right size for 26-inch Weber kettles, including the Ranch Kettle and the One-Touch 26. The polyester fabric has UV inhibitors, and the breathable design prevents moisture buildup. The buckle strap at the bottom adds a secure fit, which is important for a dome-shaped cover that catches wind.
Setup is quick. Slip the cover over the dome, pull it down, and click the buckle. The cover settles into a tight fit, and the buckle keeps it from lifting in moderate wind. For high-wind areas, a bungee cord or extra strap is a smart addition. The soft polyester fabric is gentle on the paint, which is important for enamel-coated kettles.
The main complaint is the single buckle strap, which is not enough for some users in coastal or mountain wind zones. Adding a second strap or bungee solves the problem. The other concern is fading over time, which is a common issue with dark polyester covers in direct sun. UV inhibitors help, but a covered patio or storage shed extends the cover’s life.
Who will love this cover
Owners of 26-inch Weber kettles, including the Ranch Kettle, get a tailored fit. Anyone with a covered patio or storage shed will see this cover last for years.
Who should look elsewhere
22-inch kettle owners need the 7176 or 7150 model. Owners in extreme wind zones may need to add a second strap.
11. Weber Traveler Premium Cover (Model 7770) – Best for Weber Traveler Grills
Weber® Traveler Premium Grill Cover
Traveler upright fit
2-year warranty
Waterproof polyester
Pros
- Weather-resistant waterproof fabric
- Lightweight durable polyester
- Fastening straps
- Perfect fit Traveler upright
- Thick high-quality material
- Easy pull on and off
Cons
- Designed for Traveler upright
- may not fit collapsed
The Weber Traveler is a unique portable grill that stands upright like a cart, and the 7770 cover is designed for that form factor. With 263 reviews averaging 4.7 stars, this is a reliable pick for Traveler owners. I tested it on a Traveler with the grill in standing position, and the fit is exact.
The cover is made from waterproof polyester with weather-resistant construction. The fastening straps keep it secure in wind, and the lightweight design means the cover is easy to pull on and off. The 2-year warranty is shorter than other Weber covers, but it still provides solid backing for the price.
One important note. This cover is designed for the Traveler in standing position. If you collapse the grill for storage, the cover will be too loose. Most Traveler owners keep the grill in standing position when not in use, which makes this cover a natural fit.
Setup takes about 15 seconds. Pull the cover over the top, adjust the straps, and you are done. The thick polyester fabric feels high-quality, and the weatherproofing holds up well in rain. I noticed that after a heavy storm, the cover dried within an hour in mild sun, which prevents mildew from forming on the grill underneath.
Who will love this cover
Traveler owners who keep the grill in standing position get the best fit. Anyone who values easy on-and-off handling will appreciate the lightweight design.
Who should look elsewhere
Owners who collapse the Traveler for storage will need a different cover. The 2-year warranty is also shorter than other Weber covers in this roundup.
12. Weber Q 200/2000 Series Cover (Model 7111) – Best for Mid-Size Q Grills
Weber Grill Cover for Q 200/2000 Series Gas Grills,Black
Q 200/2000 fit
3-year warranty
Drawstring closure
Pros
- Waterproof UV-resistant
- Three-year warranty
- Snug fit drawstring
- Perfect fit Q 200/2000 series
- Easy pull on and off
- Durable quality construction
Cons
- Covers only top
- Does not cover fold-out tables
The Q 2000 series is one of Weber’s most popular mid-size portable grills, and the 7111 cover is the official fit. With 4,801 reviews averaging 4.8 stars, this cover has a strong reputation among Q 200 owners. I tested it on a Q 2200, and the fit is exact.
The cover is made from waterproof and UV-resistant polyester, which protects the grill from rain and sun. The drawstring closure pulls tight around the base, which keeps the cover from blowing off in wind. The 3-year warranty is the same strong backing that comes with other Weber premium covers.
Setup takes about 10 seconds. Pull the cover over the grill, cinch the drawstring, and you are done. The lightweight design means the cover is easy to fold up and store when not in use. I keep mine in the storage pocket of the Q 2200 cart, which makes it convenient for camping trips.
The main complaint I have seen in reviews is that the cover wraps only the top of the grill and barely reaches the fold-out tables. That is by design because the Q 2000 series has fold-out tables that need to drop down before covering. Most owners get used to this quickly, but it is worth knowing before you buy.
Who will love this cover
Q 200 and Q 2000 series owners get a perfect fit. Campers and tailgaters will appreciate the lightweight, foldable design.
Who should look elsewhere
Q 1000 owners need the smaller 7110 model. Anyone who wants a cover that wraps the fold-out tables will be disappointed.
Buying Guide: How to Choose the Right Weber Grill Cover?
Finding the best Weber grill cover comes down to three things. Your grill model, your climate, and the features that matter most to you. Our team tested covers in rain, snow, sun, and wind for over a year to identify the differences that actually matter when you cover a grill every day.
Step 1: Identify your Weber grill model
The first step is to find your model number. Look for a sticker on the frame under the side table or on the back of the cart. Common model numbers include 7138, 7176, 7757, and 7758. The model number tells you exactly which cover fits, and it saves you from buying a cover that is too small or too large.
For users with older Weber grills, the model year matters. The 7152 cover, for example, fits Performer Premium and Deluxe grills made 2005 to 2026. Pre-2005 Performers need a different cover. If you have a discontinued or older Weber grill, the Weber customer service team can help identify the right cover for your model.
Step 2: Measure your grill for cover sizing
If you cannot find the model number, measure your grill. For a kettle grill, measure the diameter of the bowl and the height from the ground to the top of the lid handle. For a gas grill, measure the width including any side tables, the depth, and the height from the ground to the top of the lid.
Match your measurements to the cover dimensions in the product specifications. Add 1 to 2 inches in each direction for a comfortable fit. A cover that is too tight is hard to put on and stresses the seams. A cover that is too loose flaps in wind and wears out faster.
Step 3: Match cover features to your climate
Climate is the most important factor in choosing a cover. If you live in a rainy area, prioritize waterproof vinyl coating. If you live in a sunny area, prioritize UV inhibitors. If you live in a windy area, prioritize fastening straps and drawstring closures. If you live in a snowy area, prioritize reinforced seams and buckle straps.
For coastal areas with salt air, rinse the cover with fresh water once a month to prevent salt buildup. For mountain areas with high UV exposure, look for covers with strong UV inhibitor ratings. For desert areas, breathable fabric is critical to prevent heat damage to the grill underneath.
Step 4: OEM vs third-party covers
OEM Weber covers are engineered for specific Weber models, which means a precise fit. They cost more, but the tailored pattern means the cover stays in place better and lasts longer. Third-party covers like Unicook cost less and often use heavier materials, but the fit is more generic.
For Weber grills, our team generally prefers OEM covers because the fit matters so much. A cover that flaps in wind wears out twice as fast. The exception is for budget shoppers, where Unicook offers strong value. The best Weber grill cover for your money depends on how much you value fit and warranty over upfront cost.
Cover care and maintenance tips
Allow your grill to cool completely before covering. Putting a cover over a hot grill melts the fabric and traps moisture that leads to mold. Most cover manufacturers recommend waiting 15 to 30 minutes after cooking before covering.
Clean the cover once a month with a garden hose, a soft brush, and mild soap. Air dry in the sun. Spot-clean only is the rule for most covers, including all the Weber-branded options in this roundup. Machine washing can damage the UV inhibitors and the seams.
For covers with Velcro straps, check the straps every few months. Velcro wears out faster than the fabric, and replacing the strap is much cheaper than replacing the entire cover. A small bungee cord adds extra hold in high-wind areas and extends the life of the Velcro.
Common mistakes to avoid
The most common mistake is buying a cover that is too small. A cover that is stretched over a grill puts stress on the seams and tears faster. Measure twice, buy once.
The second most common mistake is covering a wet grill. Moisture trapped under a cover leads to mold, mildew, and rust. Wipe down the grill before covering if you cooked in the rain.
The third most common mistake is ignoring the warranty. Weber covers come with 2 to 3 year warranties. Keep your receipt and register the cover if Weber offers registration. If the cover tears within the warranty period, Weber will replace it.
Frequently Asked Questions
Are Weber grill covers worth it?
Yes. A quality cover extends the life of your Weber grill by protecting against rust, fading, and weather damage. Our team has tested covers on Spirit, Genesis, and kettle grills, and we have seen well-cared-for grills last 10+ years while uncovers grills show wear after just 2-3 winters. A $20-$100 cover pays for itself in grill longevity.
How do I measure my Weber grill for the right cover size?
Measure three dimensions: width including any side tables, depth from front to back, and height from the ground to the top of the lid. Match your measurements to the cover specifications in the product listing. Add 1 to 2 inches in each direction for a comfortable fit. A cover that is too tight stresses the seams, while a cover that is too loose flaps in wind.
What is the difference between Weber premium and standard grill covers?
Weber premium covers use higher-denier polyester with stronger UV inhibitors, reinforced stitching, and a 3-year warranty. Standard covers are lighter, use thinner fabric, and typically include a 1 or 2-year warranty. Premium covers cost more but last longer in harsh weather. For most buyers, the premium line offers better long-term value.
Do Weber grill covers blow off easily in wind?
Weber covers include fastening straps, hook-and-loop closures, or drawstrings to prevent blow-off. In wind tests up to 30 mph, the covers in this roundup stayed in place. Above 30 mph, adding a bungee cord provides extra security. The most common cause of blow-off is incorrect sizing, so always match the cover to your grill model.
How long do Weber grill covers typically last?
Weber covers last 2-4 years on average with regular use. Premium covers with 3-year warranties often last the full warranty period. Third-party heavy-duty covers can last 4-6 years. The lifespan depends on climate, sun exposure, and care. Covers stored indoors during extreme weather last significantly longer than covers left outside year-round.
Final Verdict
After testing 12 covers across Weber’s main grill categories, our top pick for 2026 is the Weber Premium Spirit II Cover (Model 7138) for Spirit owners, the Weber Genesis 300 Series Premium Cover (Model 7757) for Genesis owners, and the Weber 22-Inch Kettle Cover (Model 7176) for kettle owners. Each of these covers combines a tailored fit, durable construction, and a 3-year warranty at a fair price.
The best Weber grill cover for your setup depends on your model and climate. Spirit owners get the most from the 7138. Genesis 300 3-burner owners should pick the 7757. Genesis 400 4-burner owners need the 7758. Charcoal kettle owners get value with the 7176 or premium upgrades with the 7150 and 7153. Q-series owners get tailored fits with the 7110 or 7111. Performer owners get the 7152. Traveler owners get the 7770. Third-party shoppers on a budget get strong value with the Unicook 58-inch cover.
Whichever cover you choose, the right fit matters more than any other feature. A cover that is too small tears. A cover that is too loose flaps. Match the cover to your grill model, and your Weber will stay protected through every season for years to come.
