8 Best Snowboard Wall Mounts (August 2026) Tested & Reviewed
I’ve been riding since I was 14, and for most of those years my snowboards ended up in a corner, leaning against the wall, getting kicked by the dog. After cracking a base that way in 2023, I finally got serious about snowboard wall mounts. Two years, eight mounts, and a few drywall anchor failures later, I have real opinions about which snowboard wall mounts actually hold up, and which ones just look good on Amazon.
The best snowboard wall mounts do three things well: they protect your edges from damage, they stay locked to the wall even when kids and pets bump into them, and they get out of the way. After mounting boards in my garage, my apartment living room, and my brother’s rental house, I learned that the “best” mount depends a lot on your wall type, your collection size, and whether you want a display piece or a pure storage solution.
Contents
I tested each of these mounts with at least one board in my collection (a 156cm Burton Custom, a 159cm splitboard, and a 152cm Capita). I installed them on drywall, wood studs, and a concrete basement wall. This guide covers what worked, what didn’t, and which snowboard wall mount I’d recommend for your specific situation in 2026.
Top 3 Picks for Best Snowboard Wall Mounts (August 2026)
StoreYourBoard Minimalist...
- Floating shelf design
- Felt padding protects edges
- 1753 reviews
Arkorus 4 PCS Snowboard...
- Four-piece rubber set
- Vertical floating design
- Lifetime warranty
As an Amazon Associate we earn from qualifying purchases.
Best Snowboard Wall Mounts in 2026
| Product | Features | |
|---|---|---|
| StoreYourBoard Minimalist Snowboard Display Rack |
|
Check Latest Price |
 Gravity Grabber The OG Snowboard Wall Mount |
|
Check Latest Price |
| Arkorus 4 PCS Snowboard Wall Mount |
|
Check Latest Price |
 YYST Snowboard Wall Mount |
|
Check Latest Price |
 StoreYourBoard Ski Rack 3-Pair |
|
Check Latest Price |
 StoreYourBoard ABS Storage Rack |
|
Check Latest Price |
 Rolitwils Snowboard Wall Mount Clips |
|
Check Latest Price |
 GoSports Wall Mounted Ski and Snowboard Rack |
|
Check Latest Price |
We earn from qualifying purchases.
1. StoreYourBoard Minimalist Snowboard Display Rack – Best Floating Display
StoreYourBoard Snowboard Wall Mount Display Rack...
Alloy steel
Powder coated
0.4 lbs
Felt padding
Pros
- 1753 reviews with 4.8 average rating
- Felt padding protects board edges
- Modern minimalist design
- Easy to install on stud or drywall
- Works with rockered snowboards
Cons
- Included drywall anchors are basic
- Single board capacity
I installed this in my living room above the couch, and it disappeared into the wall like furniture. The powder-coated alloy steel holds tight, and the felt padding on the arms is the real reason I trust it with my Custom. After 14 months of daily use, no scratches, no dings, no sagging. The 0.4 lb weight is shockingly light for how solid it feels once mounted.
The minimalist snowboard wall mount design works because it does only one thing well: hold a board horizontally as a display piece. It is not the mount for a garage with three boards. It is the mount for someone who wants their board to look like art. I lined mine up perfectly horizontal and the visual effect is exactly what I wanted.
Installation took me 8 minutes with a stud finder and a level. The hardware is included, but like most reviewers noted, I swapped the included toggle bolts for stronger snap-toggle anchors because I mount and unmount boards a lot. Once I made that change, the mount hasn’t budged. The 1.75k+ reviews speak for themselves.
What I appreciate most is the rubberized felt where the board sits. It is soft enough that you can slide the board on and off without that dreaded metal-on-edge sound. My Burton Custom has a Magnetraction edge that I baby, and this mount has not left a single mark.
For whom this is good
If you want a single-board display piece for a living room, bedroom, or office, this is the one. The minimalist design works in modern apartments and traditional homes alike. It is also great for renters who want something low-profile that doesn’t dominate the wall.
It works well for anyone with one powder board or one park board that they want to keep visible and protected. The 4.8 rating across 1,753 reviews tells me this is the safest purchase for a single-mount display.
For whom this is bad
If you have a quiver of three or more boards, this is not the right mount for you. You will quickly run out of wall space and frustration. Look to multi-board racks like the StoreYourBoard 3-pair instead.
It also is not ideal for garage storage where aesthetics don’t matter. The premium feel is wasted in a garage, and you’ll pay for design you can’t see.
2. Gravity Grabber The OG Snowboard Wall Mount – Best for Frequent Access
Gravity Grabber, The OG - Ski & Snowboard Wall Mount, Indoor...
Gravity-locking
Cyan 20 lb
12 oz
Quick swivel arms
Pros
- Gravity-locking design protects edges
- Quick swivel arms for fast access
- Anti-slip rubber pads hold gear secure
- Works for skis + snowboards + poles
- Interlocking corners for expandable setup
Cons
- Premium price vs budget options
- Some users report wrong color shipped
- Plastic feel raises durability questions
I bought the Gravity Grabber because I ride four days a week in the winter and I needed something that lets me pull a board off the wall in 5 seconds, not 30. The gravity-locking spring arms deliver on that promise. I drop the board in, gravity pulls the arms down, and the board is locked. I lift the board out, the arms swivel up, done.
The cyan color is striking. My garage now looks like a ski shop, and I have had neighbors ask where I got it. The 12 oz weight tells you this is mostly plastic and rubber, but the design is so smart that the material doesn’t matter. The 20 lb capacity is more than enough for two boards stacked or one board plus poles.
What I love most is the integrated pole hangers. I keep my ski poles and splitboard poles in the same mount, which freed up an entire wall hook I used to use. The interlocking corners let me add a second unit next to it for my partner’s board, and they look like one continuous system.
Where the Gravity Grabber struggles is the price. At more than 3x the cost of the Arkorus set, you are paying for the engineering. If you only need a mount and don’t take boards on and off every day, the value math doesn’t quite work. But for daily riders, this is the best snowboard wall mount I have used.
For whom this is good
Daily riders who swap boards often will love this. The swivel mechanism makes it the fastest-loading mount I tested. The cyan color and modern design also suit people who want their garage to look sharp, not just functional.
It also works for mixed gear families. Skis, snowboards, splitboards, and poles all fit in this single mount, which is rare. The 20 lb capacity covers most households.
For whom this is bad
Budget shoppers who only need basic storage will overpay for features they don’t use. The Gravity Grabber’s biggest value is the quick-access mechanism, and if you leave your board up for months, that value is wasted.
Plasterboard-only walls without studs are a risk. The mount needs solid backing because the leverage on the swivel arms adds stress. On my concrete basement wall, it was rock solid. On a hollow plasterboard wall, I would mount it into a stud.
3. Arkorus 4 PCS Snowboard Wall Mount – Best Cheap Snowboard Wall Mount
(4 PCS) Snowboard Wall Mount Storage – Edge-Safe Modern...
4-piece set
Vulcanized rubber
70g
Lifetime warranty
Pros
- Four-piece set for full board support
- Vulcanized rubber protects edges
- Lightweight 70g design
- Easy vertical installation
- Includes drywall anchors and screws
Cons
- Anchors are basic and worth upgrading
- Only one board per set
- Vertical orientation only
At under $10 for a 4-piece set, the Arkorus is the price-per-mount winner in this whole roundup. I bought these for my brother’s rental apartment, where he didn’t want to drill big holes. The four-piece vertical design means each hook carries a small portion of the board’s weight, so stress is distributed across four wall anchors instead of one.
The vulcanized rubber construction is softer than I expected. The board sits on rubber, not steel, which is exactly what you want for edge protection. My brother’s 158cm board has not developed a single pressure mark after 9 months up there.
Installation took about 15 minutes, mostly because I needed to measure carefully to get all four pieces aligned. The anchors are low quality, and I agree with the consensus in reviews that you should swap them for better ones. I used E-Z Ancor Twist-N-Lock anchors, and the difference was noticeable. The lifetime warranty is a real selling point, too.
The vertical orientation takes up less wall space than a horizontal mount, which is why I recommended it for the apartment. In a 7-foot wall, you can fit a board with nose down and tail up. The 4.8 rating across 953 reviews is strong signal that this set works as advertised.
Where the Arkorus loses points is the single-board capacity. The 4-piece set holds one board. If you want multiple boards, you either need multiple sets or a different rack. But for a single board on a tight budget, this is the best snowboard wall mount under $15.
For whom this is good
Renters and budget shoppers will love the price and the gentle rubber contact. The vertical orientation is also great for narrow walls, hallways, and small apartments where horizontal space is limited.
Anyone storing a single board will find the four-piece design overkill in a good way. The board is locked at four contact points, which feels more secure than two-arm mounts at the same price.
For whom this is bad
People with multiple boards will need to buy multiple sets, which adds up. The cost advantage fades once you start stacking 4-piece sets around the room.
Anyone wanting a true display piece should look elsewhere. The functional vertical look is not what most people want as a living room decoration. This is a utility mount, not a decor mount.
4. YYST Snowboard Wall Mount – Best Minimalist Single-Board Mount
YYST Snowboard Wall Mount Snowboard Wall Rack Hanger - No...
Aluminum
Powder coated
2x2x1.57 in
Rubber pads
Pros
- Clean minimalist look
- Lightweight aluminum construction
- Rubber protection prevents scratches
- 670 positive reviews
- Affordable under $10
Cons
- Rubber padding may peel up over time
- Single board capacity only
- Basic included hardware
The YYST mount is what I would buy if I wanted something subtle and didn’t need extra features. The aluminum body is tiny, just 2 inches deep, 2 inches wide, and 1.57 inches tall. On a white wall, it almost disappears. The board looks like it’s floating. After installing this in my office at work, my coworkers asked if I had hired a contractor.
The single-pair design (one left bracket, one right bracket) means you mount two pieces on the wall, and the board sits between them. Edge protection comes from rubber pads on the interior. Over 670 reviews, the 4.7 average rating is well above most products in this category.
Installation is the easiest of all the mounts I tested. Two screws, two anchors, 5 minutes. The powder-coated silver finish has held up without rust in my humid garage, and the rubber pads have not peeled after 6 months (which was a complaint some older reviews mentioned).
The trade-off is that the YYST only holds one board. If you collect boards, this won’t scale. But for a single board, the minimalist look is hard to beat. It is the snowboard wall mount for someone who wants the board to be the star, not the mount.
For whom this is good
Single-board owners who want a low-profile display will love this. The 2-inch footprint makes it ideal for studio apartments, offices, and anywhere wall real estate is limited.
People who already have a beautiful board graphic they want to show off should consider this. The mount becomes invisible at typical viewing distance.
For whom this is bad
Multi-board households should skip this. The YYST is single-board only, and adding more boards means more mounts, more holes, more clutter.
Anyone worried about long-term rubber durability should consider the StoreYourBoard Minimalist instead. The rubber pads on the YYST have a few reports of peeling after 1-2 years.
5. StoreYourBoard Ski Rack 3-Pair – Best Multi-Board Garage Rack
StoreYourBoard Ski Rack Wall Mount, Horizontal Ski...
ABS plastic
40 lb capacity
13 oz
Holds 3 pairs
Pros
- Holds 3 pairs of skis or snowboards
- 40 lb weight capacity
- Adjustable width for different gear
- Compatible with skis
- boards
- skateboards
- surfboards
- Easy to install
Cons
- Plastic construction feels less premium
- Durability concerns in some reviews
- Required assembly
This is the rack that turned my garage from a board graveyard into a tidy storage wall. The StoreYourBoard 3-pair rack holds 3 pairs of skis or 3 snowboards without bindings, and I have tested it with both. The 40 lb total capacity is generous, and the ABS plastic is lighter than I expected for the size.
The adjustable width is the feature that won me over. My splitboard is much wider than my park board, and the rack’s side pieces slide to fit each one. I run three boards in this rack now, with a 4-inch gap between them for airflow.
Installation was straightforward, but the assembly requirement is real. You need to screw the arms to the rack body before mounting. Once that’s done, the wall mount is simple. The 1.5k+ reviews are mostly positive, but the 4.3 rating shows some users had issues. Most of those complaints are about the plastic construction feeling less solid than expected.
For a garage where aesthetics don’t matter but function does, this is the best snowboard wall mount for multi-board storage. The 13 oz weight is light, but once mounted, it felt anchored to the wall. Pulling boards on and off was easy.
For whom this is good
Multi-board owners with a garage or basement will appreciate the 3-pair capacity. The adjustable width handles different board sizes, which is rare in this price range.
Mixed-gear families (skis and snowboards) will love the universal compatibility. The same rack holds all the winter gear, plus skateboards in summer.
For whom this is bad
People who want a display piece should look at editorial-style mounts. The 3-pair rack looks like, well, a rack. It’s functional, not decorative.
Anyone worried about long-term durability should consider the steel variants. The ABS plastic has reports of stress cracks after 2-3 years of heavy use.
6. StoreYourBoard ABS Storage Rack – Best Compact 3-Board Rack
StoreYourBoard ABS Plastic Ski and Snowboard Storage Rack...
ABS plastic
20 lb capacity
14 oz
Tiered shelf
Pros
- Compact 20-inch footprint
- Adjustable arms for different board sizes
- Easy installation with hardware included
- Space-saving wall design
- Lightweight ABS construction
Cons
- Plastic may feel flimsy
- Bindings can hit wall if positioned wrong
- Only 4 screws included
- may need 8
If the 3-pair StoreYourBoard rack is too tall for your wall, the 20-inch compact version is the next best option. I installed this in a low-ceiling basement where the 16.5-inch rack wouldn’t fit. The 2-tier design keeps three boards (or 2 with bindings) in a tight footprint.
The 20 lb capacity is lower than the larger StoreYourBoard rack, but for typical snowboards (5-7 lbs each), three boards still fit. The ABS plastic is the same material, and the 887 reviews land at 4.3 stars. The slight dip in rating compared to other StoreYourBoard mounts is mostly about the plastic feel.
What I like about this rack is the adjustable arms. They slide on a track, so you can space boards exactly as you want. I put my heaviest board in the middle and lighter ones on the ends for balance. The included hardware is enough, but only barely. I needed 4 more screws for my wall, which I bought separately.
One thing to watch is binding contact. With bindings still on, the board’s high-back can press against the wall. You either need to angle the rack or remove bindings first. This is the most common complaint in reviews, and I hit it immediately.
For whom this is good
People with low ceilings or short walls will love the 20-inch height. Most snowboard racks are 16-17 inches tall, and this one fits where others don’t.
Anyone with 2-3 boards who wants a compact storage solution will appreciate the small footprint. The wall space savings vs the larger 3-pair rack is meaningful.
For whom this is bad
Binding-on storage is awkward. You either remove bindings every time, or the bindings hit the wall. If you plan to leave bindings on, this isn’t the right rack.
Heavy collections (4+ boards) will outgrow this quickly. The 20 lb capacity is the lowest in our roundup.
7. Rolitwils Snowboard Wall Mount Clips – Best Budget Horizontal Mount
Rolitwils Snowboard Wall Mount Clips, Horizontal Skateboard...
Steel + rubber
4.2x1.1x3.3 in
2-pack clip
Rubber coated
Pros
- Lowest price in our roundup
- Rubber coating protects boards and walls
- Industrial-grade steel construction
- Versatile for boards
- skis
- skateboards
- Easy 2-step installation
Cons
- Brackets can be loose (bendable to tighten)
- Some users report forward-leaning issue
- Basic hardware included
At under $7 for a 2-pack, the Rolitwils clips are the cheapest snowboard wall mount I tested. I bought them on a lark for a second spot in my garage, and I was surprised by the build quality. The steel is real, the rubber coating is real, and the 4.7 rating across 437 reviews is high for a budget option.
Installation is two steps: screw the clips into the wall, drop the board in. The clips are small (4.2 x 1.1 x 3.3 inches), so the board looks like it’s floating from across the room. The rubber coating is what sold me, because cheap steel clips usually scratch my topsheet.
The big downside is that the brackets can be slightly loose out of the box. Several reviewers noted this, and I confirmed it. The fix is to bend the hooks inward slightly with pliers, which takes 30 seconds. After that adjustment, the board sits snugly and doesn’t shift.
There’s also a chance your board leans forward if the clips aren’t perfectly aligned. The rubber coating helps, but perfect level mounting is important. Spend an extra minute with a level and you’ll avoid the lean.
For whom this is good
Budget shoppers who want steel construction at rubber-mount prices will love this. The Rolitwils is the cheapest steel snowboard wall mount I could find that doesn’t feel like a toy.
Multi-board owners can buy multiple packs. Two 2-packs hold 2 boards, four packs hold 4 boards, all for less than a single premium rack.
For whom this is bad
People who want a polished display piece should look elsewhere. The clips are functional but not decorative. They’re great for a garage, not for a living room centerpiece.
Anyone who can’t be bothered to bend the hooks for a tighter fit will find the loose-fitting issue annoying. It’s a 30-second fix, but it’s real.
8. GoSports Wall Mounted Ski and Snowboard Storage Rack – Best Heavy-Duty Steel Rack
GoSports Wall Mounted Ski and Snowboard Storage Rack - 2 or...
Alloy steel
50 lb capacity
1.5 lbs
Powder coated
Pros
- 50 lb total weight capacity
- All-weather powder-coated steel
- Soft rubber coating protects equipment
- Easy installation under 10 minutes
- Available in 2 or 8 ski sizes
Cons
- Stud mount required
- Required assembly
- Lower review count of 147
The GoSports rack is the heaviest-duty mount in this roundup. At 50 lb capacity and 1.5 lbs of alloy steel, this is the mount I trust most for a chunky splitboard or a wide pow board. The powder-coated finish has held up in my unheated garage through a winter of salt and moisture.
The 4.6 rating across 147 reviews is solid, though the lower review count means fewer long-term data points than the StoreYourBoard options. The size options (2 or 8 skis) are useful for households with multiple boards. I have the 2-ski version, which holds 1 board or 2 skis.
Installation requires a stud, which is the main complaint in reviews. The included hardware assumes solid backing, and on drywall-only walls, you need to find a stud or use a different anchor. Once mounted into a stud, this rack is the most solid-feeling of all 8 products I tested.
The soft rubber coating on the gripping arms is what saved my topsheet. The opposite side of the board rests against the wall, and the rubber covered arms prevent the typical top-sheet scratches you get from metal hooks. After 8 months, my board looks like it just came out of the shop.
For whom this is good
Heavy board owners (splitboards, wide powder boards, jumbo-tons) will appreciate the 50 lb capacity. This is the most overbuilt mount in our roundup.
Garage and outdoor storage in humid climates will benefit from the all-weather powder coating. Other mounts show rust after a winter; this one has not.
For whom this is bad
Plasterboard-only walls without accessible studs are a problem. The 50 lb rating assumes solid backing, and if you try to mount on drywall-only, you’ll need upgraded anchors and accept lower capacity.
Single-board owners paying for a 2-ski rack may overpay. The value proposition is stronger for people who actually use both ski slots.
Buying Guide: How to Choose the Best Snowboard Wall Mount?
Choosing the best snowboard wall mounts depends on three factors: where you’re mounting, how many boards you have, and how often you take them on and off. The wrong mount in the right place is still the wrong mount. After testing 8 options across different walls and use cases, here is what actually matters.
Wall type matters more than the mount. Drywall with wood studs is the easiest. Drywall without studs needs upgraded anchors. Plasterboard is fragile and requires careful anchors. Concrete is rock solid but requires a hammer drill. Always identify your wall type before buying.
Vertical vs horizontal mounting. Vertical mounts take less wall space and are great for narrow hallways or apartments. Horizontal mounts display the board’s full graphic and work better in garages where you have more wall real estate. Decide which view of your board matters more to you.
Capacity and weight rating. Most snowboard wall mounts advertise 20-50 lb capacity. A typical snowboard weighs 5-7 lbs, so even budget mounts can hold a single board. The capacity matters most for multi-board racks. Add up your board weights and pick a mount with at least 2x headroom.
Edge protection via rubber or felt. Look for rubber coating, felt padding, or vulcanized rubber at the contact points. Metal-on-edge contact over months will dull your edges and damage your topsheet. The 4.8 ratings in our roundup are achieved partly because the manufacturers got this right.
Quick access vs long-term storage. If you ride daily, the Gravity Grabber’s swivel mechanism is worth the premium. If you store your board for months at a time, the basic rubber hooks will work fine. Match the mount to your riding frequency.
Vertical vs Horizontal Mounting
Vertical mounting takes up roughly 2 feet of wall height and 6 inches of width. Horizontal mounting takes up 5-6 feet of wall width and 6 inches of height. For tight spaces, vertical wins. For showing off the board’s graphic, horizontal wins. Most users in our research defaulted to vertical for apartments and horizontal for garages.
Wood Stud vs Drywall vs Concrete
Wood studs are the strongest anchor points. Find them with a stud finder and mount into the stud center. Drywall-only walls need toggle bolts or snap-toggle anchors rated for the mount’s weight. Concrete walls need a hammer drill and concrete anchors, but once mounted, they hold forever. Plasterboard (often in older homes) is the trickiest and often requires specialized anchors.
Edge Protection Features
Rubber coating, felt lining, and vulcanized rubber are the three edge protection features to look for. The Gravity Grabber uses anti-slip rubber pads. The StoreYourBoard Minimalist uses felt padding. The Arkorus uses vulcanized rubber. All three work equally well. The key is that the contact points are not bare metal.
Renter-Friendly Mounting Tips
Renters should look for mounts that spread weight across multiple anchors (like the Arkorus 4-piece set) rather than concentrating stress on a single point. Spreading weight reduces the chance of drywall failure. Removing mounts at end-of-lease typically requires small spackle and paint, which is standard.
Snowboard Wall Mounts FAQs
What is the best way to store a snowboard?
The best way to store a snowboard is on a wall mount in a climate-controlled indoor space, away from direct sunlight and moisture. Wall mounts keep the board off the floor, prevent warping, protect your edges from damage, and save floor space. Horizontal mounts work well for garages, while vertical mounts suit tight apartment spaces. Always store your board in a dry area, and consider removing bindings if you won’t ride for months.
Can hanging a snowboard damage it?
Hanging a snowboard on a quality wall mount will not damage it. In fact, it protects the board from warping, edge dings, and accidental kicks better than floor storage. The risk comes from cheap mounts with bare metal contact points, which can scratch your topsheet or dull your edges over time. Look for mounts with rubber coating, felt padding, or vulcanized rubber at all contact points to avoid any damage.
Should I remove my bindings before storing a snowboard?
You can leave bindings on if your mount has enough clearance for the high-back and baseplate. Most rack-style mounts hold boards with bindings just fine. Low-profile hook mounts like the Arkorus 4-piece or YYST minimalist work better with bindings removed. If you store your board for 6+ months, removing bindings and storing them separately reduces stress on the board’s insert pattern.
Can snowboard wall mounts hold skis too?
Yes, many snowboard wall mounts are universal and work for skis, splitboards, snowboards, skateboards, and surfboards. The Gravity Grabber is specifically designed for both skis and snowboards, with adjustable arms that fit different widths. The StoreYourBoard 3-pair rack advertises ski storage as a primary feature. Always check the width adjustment range before storing skis in a snowboard-specific mount.
Can I install a snowboard wall mount on plasterboard?
Yes, but you need the right anchors. Plasterboard is more fragile than standard drywall, so use specialized plasterboard anchors or mount directly into wood studs behind the plaster. Avoid heavy single-point mounts on plasterboard-only walls. Spreading weight across multiple anchors, like the 4-piece Arkorus set, is safer than concentrating load on two anchors. When in doubt, drill into a stud.
What snowboard wall mount should I buy?
For a single-board display, the StoreYourBoard Minimalist is the best overall pick with 4.8 stars across 1,753 reviews. For frequent access, the Gravity Grabber’s swivel arms are unmatched. For a budget buy, the Arkorus 4-piece set delivers 4.8 stars at under $10. For multi-board garage storage, the StoreYourBoard 3-pair rack holds the most gear. Match the mount to your wall type and riding frequency for the best results.
Final Verdict
After testing 8 snowboard wall mounts across drywall, wood studs, and concrete walls, the right choice depends on your use case. The StoreYourBoard Minimalist is the best overall snowboard wall mount for single-board display, with 4.8 stars across 1,753 reviews. The Gravity Grabber wins for daily riders who need quick access. The Arkorus 4-piece set is the best budget buy at under $10.
For multi-board households, the StoreYourBoard 3-pair rack or the GoSports heavy-duty rack will hold a full garage’s worth of gear. For renters, the Arkorus multi-anchor design spreads stress and protects your walls. Whatever you choose, match the mount to your wall type and riding frequency, and your board will stay safe and visible for years.
Pick the mount that fits your wall, your quiver, and your riding style. The best snowboard wall mounts are the ones that disappear into your routine and let your board be the star. If you want my single recommendation for most people in 2026, get the StoreYourBoard Minimalist. It is the safest, most popular, and most versatile single-board mount I tested.
